THE METHOD PROPOSAL FOR CALIBRATION OF THE ALIGNMENT CELL |
|---|
| B. Aydemir, H. Dizdar, C. Vatan |
- Abstract:
- The alignment measurements of material testing machines can be made according to ASTM E1012 and ISO 23788 standards. These standards provide information on alignment devices, alignment measurement, and post-measurement calculations. However, they can't make a definition for the calibration of the alignment measuring device. For this purpose, this article has been prepared as a recommendation for the calibration method of the alignment measuring devices and the evaluation after the measurements. In this study, the calibration method of the alignment measuring device is defined and the calculations are given clearly with two different numerical examples.
- Keywords:
- alignment; calibration method; alignment devices calibration; ASTM E1012; ISO 23788
- Download:
- IMEKO-TC3-2022-015.pdf
- DOI:
- 10.21014/tc3-2022.015
- Event details
- IMEKO TC:
- TC3
- Event name:
- TC3 Conference 2022
- Title:
24th Conference on the Measurement of Force, Mass and Torque (together with the 14th TC5 Conference on the Measurement of Hardness, the 6th TC16 Conference on Pressure and Vacuum Measurement, and the 5th TC22 Conference on Vibration Measurement)
- Place:
- Cavtat-Dubrovnik, CROATIA
- Time:
- 11 October 2022 - 13 October 2022