COMPARISON OF DIMENSIONS, SHAPES AND POSITIONS CONTROL USING CMM AND 3D SCANNER

Kenan Varda, Almira Softić, Nermina Zaimović-Uzunović, Ernad Bešlagić

Abstract

In this paper, measurements on stainless steel AISI 304 workpiece using Coordinate measuring machine Carl Zeiss Contura G2 and 3D scanner RangeVision PRO are compared and analyzed. Dimensional control is conducted by measuring 11 faces and 9 cylinders. Length, diameter, cylindricity, flatness and parallelism are controlled for features of interest. Using Calypso software on CMM and GOM Inspect software for 3D scanned model are used for creating virtual measurement strategies and dimensional and GD&T control. Deviations of measuring results using both measuring systems are shown and conclusions and recommendations for dimensional control are listed in tables.

Keywords

metrology; CMM; 3D scanning; inspection; measurement

Download

IMEKO-TC11-2022-01.pdf

DOI

10.21014/tc11-2022.01

IMEKO TC

TC11 - Measurement in Testing, Inspection and Certification

Back to the proceedings