METROLOGICAL ASPECTS OF THE INDUCTIVE DYNAMIC DRIVE RESEARCH |
|---|
| Jankowski Piotr, Mindykowski Janusz |
- Abstract:
- The article is the synthetic description of the methods applied by authors to assign the quantities characterizing the proprieties of an inductive dynamic drive. The used measuring methods were divided as follows:
1) direct methods which make it possible to mark the searched quantities on the basis of direct observation of the tested measuring system,
2) indirect methods which use obtained results (in direct method) to determine the measured quantities.
Very often they require a more complex computer processing or even the use of mathematical models. The experimental registration of coil current and the disc displacement was classified as a direct method. The simulating determination of speed, the acceleration and the state of stress in the disc with the use of the coil current and the displacement were classified as an indirect method. - Keywords:
- drive, displacement, acceleration, deviation, measurement
- Download:
- IMEKO-WC-2012-TC21-P3.pdf
- DOI:
- -
- Event details
- Event name:
- XX IMEKO World Congress
- Title:
Metrology for Green Growth
- Place:
- Busan, REPUBLIC of KOREA
- Time:
- 09 September 2012 - 12 September 2012