Bond analysis of thermally conditioned FRCM-masonry joints |
|---|
| Luciano Ombres, Antonio Iorfida, Stefania Mazzuca, Salvatore Verre |
- Abstract:
- Results of an experimental investigation on bond between thermally conditioned FRCM-masonry joints is presented and discussed in the paper. Single lap shear tests were conducted on clay brick specimens strengthened with different FRCM systems (basalt, steel and PBO-FRCM systems). Before testing specimens were thermally conditioned by exposure to different temperature values: 20°C (ambient temperature), 100 °C, 150 °C and 200°C. The thermal treatment was developed in this way: strengthened specimens were kept in oven and exposed to constant temperature over a period of three hours, then, they were removed and cooled down freely to ambient temperature. After the thermal treatment, specimens were tested at ambient temperature. Experimental results allow to evaluate the influence of the thermal conditioning on the local bond-slip response of strengthened specimens.
- Download:
- IMEKO-TC4-ARCHAEO-2017-141.pdf
- DOI:
- -
- Event details
- IMEKO TC:
- TC4
- Event name:
- TC4 MetroArchaeo 2017
- Title:
IMEKO TC4 International Conference on Metrology for Archaeology and Cultural Heritage
- Place:
- Lecce, ITALY
- Time:
- 23 October 2017 - 25 October 2017