1 kN·m UNIVERSAL TORQUE CALIBRATION MACHINE WITH REFERENCE TORQUE TRANSDUCER AT SASO / NMCC |
|---|
| C. Dogan, S. Tunacı, S. A. Bin Jarbua, S. M. AlQarni |
- Abstract:
- 1 kN·m universal torque calibration machine with reference torque transducer was established at National Measurement and Calibration Center (SASO / NMCC) in 2019. Torque values are generated over reference torque transducers by means of a servo motor. The machine is equipped with an air bearing and a torque arm mounting component. It is possible to calibrate torque transducer, torque wrench with high accuracy and also hand torque tools with this machine. In this paper, the mechanical structure of the machine and the result of the performances test and uncertainty assessment are described. The relative expanded measurement uncertainty is smaller than 2 × 10-4.
- Keywords:
- torque calibration machine; torque calibration with reference torque transducer; static torque calibration; air bearing; uncertainty
- Download:
- IMEKO-TC3-2022-041.pdf
- DOI:
- 10.21014/tc3-2022.041
- Event details
- IMEKO TC:
- TC3
- Event name:
- TC3 Conference 2022
- Title:
24th Conference on the Measurement of Force, Mass and Torque (together with the 14th TC5 Conference on the Measurement of Hardness, the 6th TC16 Conference on Pressure and Vacuum Measurement, and the 5th TC22 Conference on Vibration Measurement)
- Place:
- Cavtat-Dubrovnik, CROATIA
- Time:
- 11 October 2022 - 13 October 2022